Tracker

 
This point to point testing mode allows the User to see determine the LCR (Inductance, Capacitance and Resistance) characteristics on a pair of Test Points.  Usually the pair of test points would be selected across a component in a circuit, such as a diode or inductor.  However, pairs of test point can be selected  in an adhoc fashion and the Tracker used to capture a signature of the selected pair.
The Tracker application will chart the output in a graphical format and, if a 'gold' is available from a previous test, provide an overlapping 'gold' signature for easy of comparison.
All tests can be saved as a new Test Profile or existing Test Profiles updated.  All results are saved in csv or captured in pdf format for future post-test analysis.

Made with help of Dr.Explain