×
Menu
Search
 
   
   
   
 
© 2009-2018 Copernicus Technology Ltd.  All Rights Reserved. Ver 3.00(CTL)

Direct I/O Settings

Legacy systems running WindowsXP only.
To allow the CC to communicate with the IFD™ TE under Windows XP, a program called Direct I/O is used.  This program uses a dll called INPOUT32.dll which is held in the root of the legacy folder structure.
 
Direct I/O comes as part of the legacy IFD™ installation if the installation OS is WindowsXP, and it is installed automatically with all the default setting shown below.
However, to install Direct I/O as a separate utility follow the following steps:
 
Ø     Download the latest version from http://www.direct-io.com
Ø     Install Direct I/O onto the computer
Ø     Open Direct I/O from the Start Menu
Ø     Add the following ports on the I/O Ports tab to make them active as follows:
 
 
Ø     Add the following programs on the Security tab as follows:
 
 
Ø     Add the licence details at the Info tab as provided by your Authorised Distributor.
 
More information on Direct I/O can be follow on the website http://www.direct-io.com
Made with help of Dr.Explain