Map Viewer - Select TP

Map Viewer - Select TP
1
Title
1. Title
Title shows the viewer type and the UUT.
2
Viewer Controls
2. Viewer Controls
Viewer Controls include (from the left), 50% Opacity, Pin Viewer to the Top, Minimise, Close
3
Map View
3. Map View
The list shows all the test points in the map, the Test Point number, Nomenclature, its node and CXN is a dynamic view of the current connection status of each of the TPs.
The connections are detailed as follow:
  • IFD to show that the TP is actively on the IFD bus (Neural Network)
  • NetGnd to indicate that the TP is suspended or is a Nodal Gnd in the Neural Network
  • M+ indicates the TP is on the Plus Measurement Bus
  • M- indicates the TP is on the Minus Measurement Bus
4
Filter Band
4. Filter Band
Click on the navigation bar to reveal the Filter Band.
5
Filter Status
5. Filter Status
The filter status shows the User if a filter has been applied using the Filter Band, and the return test points being displayed as a result of the filter.
6
TP Selection
6. TP Selection
For Click&Test™ the Map Viewer allows the User to quickly access the UUT Map File in a table format.
From this view, the User can easily select TPs for connection to the nominated Instrumentation ie LogScope™ Testing, Diode Testing, SSTDR Testing, Tracker Testing or External Instrumentation.
Only one TP per M'Plus and M'Minus measurement buses can be connected at anyone time.
When a TP is selected, the CXN column will indicate if the connection has been made, and show either M+ or M- depending on the measurement bus selected.
If Test Profiles are being used, only the Select column for the master TPs will be shown.
 

Made with help of Dr.Explain